Johansson 6505UK Use Manual page 8

Notes:
- VHF cluster: the display shows L05 to L10 for the standard "L" channels and 05 to 12 for the "B/G" standard channels.
- Single channel mode:
when the Start Channel ( Start ) is selected, the Stop Channel ( Stop ) is automatically set at the same value.
Start
- Park function:
To switch off a cluster, select Start and set the value to 00. The Stop value is automatically set to 00.
Start
- If there are overlapping clusters, the display dots will blink alternately.
Start
Cluster 1
Ch. 24 - 25
To check the channel settings of each cluster:
- Turn the button to select Filter & Input Selection.
- Puch the rotary button to enter the selected mode.
- Turn the button to choose the cluster to be checked.
- The disoplay shows the channels which have been set.
Exemples :
Examples are:
- Push the button to exit.
Cluster 2
Ch. 25 - 26
Filter & Input Selection
Filter & Input Selection
VHF 1 2 3 4 5
Cluster is parked
Cluster is set to channel 22
Filter & Input Selection
Channel
LED is green
LED is red
6 7 8 9
Blinking 22 and 23:
cluster is set from 22 to 23.
LED is green
8