Rowlinson SS354B Quick Start Manual

7. Bolts

Position a towerbolt at the top of each door and their catch plates on the door header strip as shown. Ensure the bolts
align with the catch plates so that the bolts fits in the catch plate when in the locked position. Secure each bolt using
4 x 19mm black round head screws and 4 x 19mm black round head screws for each catch plate. Position a third tower
bolt and catch plate in line with the bottom door hinges. Attach the bolt to one door and the catch plate to the other.
Ensure the bolt slides into the catch plate and fix using 4 x 19mm black round head screws and 4 x 19mm black round
head screws for each catch plate.
19mm
black
19mm
black
8. Lid stays & chains
Secure a lid stay to the inside of the side panel top frames, using 1 x 50mm screw per stay. Attach two chains to each
lid. Screw through the end link of each chain into the side of the lid frames as shown using 1 x 19mm silver round head
screw for each chain .
50mm
If in doubt of any aspect regarding the assembly, use or safety of your bin store please contact us :
Help Line: (Normal Office Hours) 01829 261 121
Email: support@rowgar.co.uk
ROWLINSON GARDEN PRODUCTS LIMITED
Green Lane
Wardle Nr. Nantwich
Cheshire
CW5 6BN
www.rowgar.co.ukv
19mm

Using the bin store

Position the bin inside
the store, loop the
chains around the
handles of the bin and
attach the S hook to one
of the chain links.
Ensure the lid of the bin
shuts fully when the lid
is down.
We constantly improve the quality of our products, occasionally the
components may differ from the components shown and are only
correct at time of printing. We reserve the right to change the
specification of our products without prior notice.
2016 © Rowlinson Garden Products Ltd
Pent Double Bin Store
Assembly Instructions

Before assembly

•
We recommend that time is taken to
read the instructions before starting
assembly, then follow the easy step
by step guide.The instruction sheet
is only a guide to the assembly.
Certain items may not be shown to scale.
•
Check all components prior to assembly
•
This product should be assembled
by no less than two people.
•
Never attempt to erect the assembly
in high winds.
•
Drill all components where indicated.
x 2
Drill

Recommended tools for assembly

•
Cross head screw driver
•
Drill with 3mm diameter drill bit
.
No. Components
Qty
1 Back panel 2
2 Left side panel 1
3 Right side panel 1
4 Back panel joint rail 1
(35x28x250mm)
5 Lid stay block 2
(35x28x150mm)
6 Door frame uprights 2
(28x28x1090mm)
7 Door header frame 1
(45x28x1330mm)
8 Base rail 1
(45x15x1330mm Beveled)
9 Door hinged strip 2
(63x12x1115mm)
10 Header strip 1
(50x12x1424mm)
11 Lid hinge strip 1
(50x12x1500mm)
12 Left door 1
13 Right door 1
14 Left lid 1
15 Right lid 1
16 Lid stay 2
(28x15x650mm)
No.

Fixing Kit

Qty.
17 Black T-hinge 8
18 Towerbolt and catch plate 3
19 Chains 4
20 70mm screws 2
21 50mm screws 30
22 40mm screws 2
23 25mm black screws 81
24 19mm black roundhead screws 24
25 19mm silver roundhead screws 4
English SS354B

Biocidal Products Regulation EU 528/2012

Permawood ACQ1900 treated wood is a treated article that incorporates biocidal
products: copper hydroxide and Benzalkoniumchloride. They protect wood against
fungal decay /rot/ and insect attack.Keep away from food, drink and animal feeding stuffs.
Avoid breathing dust when cutting treated wood.
14
7
10
5
17
2
18
19
4
12
9
13
6
8
11
15
1
3