Hide thumbs Also See for BBQ Party Arbour:

Advertisement

6. Roof section to uprights

Fix the L-brackets to the uprights using 2 x 40mm screws per bracket. Lift roof onto uprights so that rebates in the
roof rafters rest on the uprights, secure roof to L-bracket using 2 x 40mm screws per bracket.

Safety information

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
When the side tables are put in the raised position, ensure they are locked in place by turning the turn buttons.
When used as a Barbecue Station, the barbecue should not be left unattended.
Periodically check all fastenings for tightness
For domestic use only
If in doubt of any aspect regarding the assembly, use or safety of your arbour please contact us :
Help Line (Normal Office Hours) 01829 261 121
ROWLINSON GARDEN PRODUCTS LIMITED
Green Lane
Wardle Nr. Nantwich
Cheshire
CW5 6BN
40mm
40mm
We constantly improve the quality of our products, occasionally the
components may differ from the components shown and are only
correct at time of printing. We reserve the right to change the
specification of our products without prior notice.
2010 © Rowlinson Garden Products Ltd
BBQ Party Arbour
Assembly Instructions

Before assembly

We recommend that time is taken to
read the instructions before starting
assembly, then follow the easy step
by step guide.The instruction sheet
is only a guide to the assembly.
Certain items may not be shown to
scale.
Check all components prior to assembly
barbecue should not be
This product should be assembled
by no less than 2 people.
Never attempt to erect the assembly
in high winds.
Drill all components where indicated.
x 2
Drill
Recommended tools for assembly
Cross head screw driver
Drill with 3mm diameter drill bit
13mm Spanner
No.
Components
Qty.
1
Seat back
1
2
Seat
1
3
Left upright
1
4
Right upright
1
5
Upright top rail
2
13
6
Upright top rail support
2
7
Lattice back panel
1
8
Roof slat sections
2
9
FR/BL* roof rafters
2
10
FL/BR* roof rafters
2
11
Centre roof rafter
2
12
Roof coverstrips
1
13
Finials
2
*FR/BL = Front right/back left
FL/BR = Front left/back right
No.
Fixing kit
Qty.
14
Metal L-brackets
6
15
70mm screws
8
16
60mm screws
12
17
40mm screws
54
18
100mm Bolts
2
19
Nuts
2
20
Washers
2
English SS141D
Caution
When used as a
Barbecue Station, the
left unattended.
9
14
12
5
11
8
6
7
3
1
2
10
4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BBQ Party Arbour and is the answer not in the manual?

Questions and answers

Summary of Contents for Rowlinson BBQ Party Arbour

  • Page 1 Green Lane correct at time of printing. We reserve the right to change the Wardle Nr. Nantwich Nuts specification of our products without prior notice. Cheshire Washers CW5 6BN 2010 © Rowlinson Garden Products Ltd...
  • Page 2 1. Seat back to uprights 4. Roof section assembly Drill the back panel as shown in the diagram at both ends. Position back panel between the uprights as shown. Screw Bend a roof slat section and fit it into the rebates of 2 bearers as shown below. Secure each bearer using 2 x 40mm through the drilled holes into the uprights using 4 x 70mm screws.

Table of Contents