Fife MAXCESS SE-26B Operating Instructions Manual page 30

7 - 6
Set up for broken material
edges or print edges only
MI 1085 1
D-MAX(E) WITH OPERATOR INTERFACE OI-N
Setting the polarity
The guiding direction (polarity) must be checked depending on
the mechanical installation direction of the system and adjusted
if necessary.
∙ Select menu 1y>>.3.y8
(F6 key  Polarity)
Polarity
∙ Set the
Setting the gain
The gain must be set optimally.
∙ Select menu1y>>.3.y3
(F6 key  Gain)
Gain
∙ Set the
Adjusting the ASC limits
Set the values of the
+90%.
∙ Select menu 1y.3.y6.
(Enter key  Job Settings  ASC)
∙ Select menu 1y.3.y6.2
ASC Threshold 1 (Pos)
Enter
Typical value: +90%
∙ Select menu 1y.3.y6.3
ASC Threshold 2 (Neg)
Enter
Typical value: -90%
SE-26B
ASC limits
to the range from -90% to
ASC
www.maxcess.eu