Operating An Ipod Directly - Passenger Control - Sony MEX-BT4000P Operating Instructions Manual

Caution for iPhone
When you connect an iPhone via USB, telephone
volume is controlled by the iPhone itself. In order
to avoid sudden loud sound after a call, do not
increase the volume on the unit during a
telephone call.
Note
Do not detach the front panel during playback of
the iPod, otherwise data may be damaged.
Tip
The iPod is recharged while the unit is turned on.
Resuming mode
When the iPod is connected to the dock
connector, playback starts in the mode set
by the iPod. In this mode, the following
buttons do not function.
–  (REP)
–  (SHUF)
Changing display items
Press .
Note
Some letters stored in iPod may not be displayed
correctly.
Skipping albums, podcasts,
genres, playlists and artists
To Do this
Press / (ALBUM /
Skip
) [press once for each
skip]
Press and hold /
Skip
(ALBUM /)
continuously
[hold to desired point]
Operating an iPod directly
— Passenger control
You can operate an iPod directly even when
it is connected to the dock connector.
1
During playback, press and hold
.
"MODE IPOD" appears and you will be
able to operate the iPod directly.
To exit the passenger control, press and
hold .
"MODE AUDIO" will appear and direct
operation of the iPod will not be possible.
Note
The volume can be adjusted only by the unit.
15