Britax Y2K 03.A User Manual page 18

Care and Maintenance
Buckle
R R e e m m o o v v a a l l : :
1 With restraint removed from the
base, pull cover and foam back so
that the buckle slots are visible.
2 Locate metal buckle strap
retainer on the top side of the
restraint.
3 Pull retainer up to loosen.
4 Turn the retainer so that the short side will go down through the slot
in the restraint shell to the bottom side of the restraint.
5 From the bottom of the restraint, turn the retainer so the short side will
go up through the slot in the restraint shell to the top side of the restraint.
6 Thread the retainer through the hole in cover to remove buckle from
restraint.
I I n n s s t t a a l l l l a a t t i i o o n n : :
1 Locate the appropriate buckle slot.
2 Turn the buckle retainer so that the short side will go through the
slot in the cover and restraint shell (Fig. A).
3 From the bottom of the restraint, turn the retainer so the short side
will go up through the unused slot in the restraint shell to the top
side of the restraint.
4 Replace cover and belly pad.
5 Pull buckle away from restraint until tight, then verify that the
strap is not twisted and the release button is facing outward.
32
A
Cleaning the Buckle
If a child eats and drinks while in
the restraint, the buckle may need
to be periodically checked and
cleaned of any accumulated
debris or dried liquids.
• THOROUGHLY RINSE,
using warm water (Fig. B).
• SOAK, overnight if possible,
using warm water to loosen
hardened drinks or food.
• TEST THE BUCKLE, by
fastening and unfastening
until a positive click is heard
after inserting the second
buckle tongue (Fig. C). If a
click is not heard, repeat
cleaning procedure.
• TOWEL DRY
• DO NOT: Lubricate, use solvents, abrasive cleaners, soap or
household detergents.
Care and Maintenance
B
Unbuckle Buckle
C
33