Functional Description; Installing Or Removing Battery Cartridge - Makita LS002G Instruction Manual

2. Turn the adjusting bolt clockwise or counterclock-
wise so that it comes into a contact with the floor sur-
face to keep the tool stable.
1
► 1. Adjusting bolt
Installing the dust extraction hose
Connect the dust extraction hose to the tool as
illustrated.
Make sure that the elbow and the sleeve fit properly to
the ports of the tool.
4
3
► 1. Dust extraction hose 2. Elbow 3. Sleeve 4. Port
2
4
To remove the elbow from the port, pull the elbow while
pressing down the lock button.
To remove the sleeve from the port, turn it clockwise
and then pull it apart.
2
3
1
► 1. Elbow 2. Lock button 3. Sleeve 4. Port
FUNCTIONAL
DESCRIPTION
WARNING:
switched off and the battery cartridge is removed
before adjusting or checking the functions on
the tool. Failure to switch off and remove the battery
cartridge may result in serious personal injury from
accidental start-up.
Installing or removing battery
cartridge
CAUTION:
installing or removing of the battery cartridge.
CAUTION:
tridge firmly when installing or removing battery
cartridge. Failure to hold the tool and the battery
cartridge firmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge
and a personal injury.
10 ENGLISH
1
4
Always be sure that the tool is
Always switch off the tool before
Hold the tool and the battery car-