Bamo NivOil Instruction Manual page 24

NivOiL-OP/10 – Hydrocarbon fluid layer thickness sensor
(Only for use with an alarm device NivOil)
sensor type:
Wetted parts:
cable:
protection:
temperature limits:
Ex protection class:
AtEX certificate:
NivOiL-HP/10 – Overfilling sensor
(Only for use with an alarm device NivOil)
sensor type:
Wetted parts:
cable:
protection:
temperature limits:
Ex protection class:
EN
AtEX certificate:
NivOiL-SP/10 – Sludge layer sensor
(Only for use with an alarm device NivOil)
sensor type:
Wetted parts:
cable:
protection:
temperature limits:
Ex protection class:
ateX certificate:
(1)
(2)
msx531-01_B
capacitive, high frequency
antistatic pe stem; stainless steel end probe
elastomer resistant to oils and hydrocarbon fluids,
blue colour; wires 2x1mm
alarm device nivoil on screw connectors;
10 m long cable
ip68 acc. en 60529
-20...+60°c
II 1 g Ex ia IIB t4 (Intrinsic safety)
BVS 07 AtEX E 091X
ptc sensor
antistatic pe stem; stainless steel end sensor
elastomer resistant to oils and hydrocarbon fluids,
blue colour; wires 2x1mm
alarm device nivoil on screw connectors;
10 m long cable
ip68 acc. en 60529
-20...+60°c
II 1 g Ex ia IIB t3 (Intrinsic safety)
BVS 07 AtEX E 092X
ultrasonic detection type
pVc
elastomer resistant to oils and hydrocarbon fluids,
blue colour; wires 2x1mm
alarm device nivoil on screw connectors;
10 m long cable
ip68 acc. en 60529
-20...+60°c
II 1 g Ex ia IIB t4 (Intrinsic safety)
BVS 09 AtEX E 021X
these three probes could be mounted in zone 0
concerning the intrinsic safety parameters [u
please report to the ateX certificate of each probe.
11-05-2010
2
, connections to the
(max length is 300 m)
2
, connections to the
(max length is 300 m)
2
, connections to the
(max length is 300 m)
, i , p and c , L ],
i i i i i
24