HP ESG E4400B Installation Note page 6

3. Verify that the following items were unpacked:
readme.txt
dlserial.bat
dlfmwr.bat
dlarb.bat
split_dl.exe
wait.exe
ask.exe
falcon.out
arbdsp.out
NOTE The directory may also contain files that are used for other operating systems.
4. Execute the dlserial.bat script to start the firmware download program.
a. Change your computer directory to the update directory as follows:
C:\cd c:\update
b. Within the update directory, type dlserial.bat and press
start the firmware download program.
c. See the Appendix for the DOS directory setup example.
5. Follow the instructions as they are presented.
• Press any key to continue refers to any key on the computer keyboard. Do not press any
keys on the signal generator.
• Close all Windows programs. Any interruption of serial communications will cause the download
process to fail.
• The firmware download will be complete when the large complete note is displayed at the end of
the download on the computer's screen.
a. When you see this prompt: Will you be using COM1 for this firmware download?
(Y/N) Return, press the computer keyboard
= Continue with the download.
Y
= Causes a prompt to the user about using COM2.
N
b. When you see this prompt: Will you be using COM2 for the firmware download?
(Y/N) Return, press the computer keyboard
= Continue with the download.
Y
= Download will be terminated. The port must be either COM1 or COM2.
N
6
(these instructions)
(script to perform the download)
(script to perform the EGS firmware download)
(script to perform the UND firmware download)
(auxiliary program used by dlserial.bat)
(auxiliary program used by dlserial.bat)
(auxiliary program used by dlserial.bat)
(the ESG firmware image)
(auxiliary firmware for the UND option)
on the computer. This will
Enter
or key.
Y N
or key.
Y N
Installation Note E4400-90235