Haier U Series Service Manual page 123

9.12 Removal of Fan Rotor and Fan Motor
Procedure
Step
Loosen the 2 screws
3
and lift the bell mouth to
undo the hooks.
Remove the bell mouth.
4 Loosen the fixing hooks
and release the lead
wire.
HSU-09,12H03/R(DB)
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
120
Removal Procedure
Points
Put the lead wire through the
back of the motor when
assembling. (so as not to be
entangled with the propeller
fan)
Domestic Air Conditioner