Intended Use; Accessories, Spare Parts And Wear Parts; Ambient Conditions - Bosch rexroth NYCe 4000 Instruction Manual

NYCe 4000 Linear motion control sys-
tem
CAUTION
NOTICE

4 Intended Use

The system housing is for indoor use only, and may only be used with parts
indicated in this document. Not explicitly mentioned parts may not be installed
or connected. This also applies to cables. Usage is only allowed in explicitly
indicated combinations of parts.
Do not install and use this system housing before you have read all relevant
documents. You must read the safety instructions and all other directions for
use before you start any work or activity with this system housing.
The system housing has no certified functional safety on board. This means that
all precautions for a safe operation must be ensured by external components.

5 Accessories, Spare Parts and Wear Parts

The following accessories are available for this system housing.
Type code
NYA04.1-FAN-2DRV-NY4922/10
NYA04.1-CAP-100V-NY4921/00
NYA04.1-COVRPL-NO-USED-NY4900
NYA04.1-SHIELD-SUP-MOT-5PCS-NY4910
Tab. 5-1: Accessories for the NY4074 system housing
The system housing does not contain any replaceable or wear parts. In case of
failure, the entire system housing must be replaced.

6 Ambient Conditions

Maximum environment
temperature
Relative Humidity
In case of non-compliance with this safety
instruction, minor or moderate injury could
occur.
In case of non-compliance with this safety
instruction, property damage could occur.
Operating
+5 °C .. +55 °C
10 % .. 90 % (non-condensing)
Material number Description
R911325083 Fan unit – 2 drive slots
R911325079 Capacitor kit 100V
R911318964 Cover plate for non-used slots
Motor cable shield and support
R911172999
bracket
Storage and transport
–40 °C .. +85 °C
5 % .. 95 % (non-condensing)
R911383227_Edition 04 Bosch Rexroth AG
7/33
Ambient Conditions