Huawei SUN2000-8KTL Quick Manual page 15

4. (Optional) Remove the Smart Dongle for future use.
• This section describes how to remove a WLAN-FE Smart
Dongle.
• The 4G Smart Dongle and WLAN Smart Dongle can be
removed similarly.
5. Remove the signal cable connector for future use.
6. Remove the PE cable and remove the crimped OT terminal. Set the cable aside for future use.
Removing SUN2000-(8KTL–20KTL)-M0
Loosen the nuts, flat washers, and spring washers of the two expansion bolts below.
1. (Optional) Open the anti-theft lock.
Smart Dongle port (GPRS/4G/WLAN)
2. Remove the SUN2000 from the mounting bracket.
Expansion
bolt
14
Communications port (COM)