Huawei SUN2000-8KTL Quick Manual page 13

4. Choose Maintenance > Device replacement and select a device replacement type to replace
or restore the protocol.
Before replacing SUN2000-(8KTL–12KTL) with SUN2000-(8KTL–12KTL)-M2, you must replace
the protocol. Otherwise, SUN2000-(8KTL–12KTL)-M2 cannot connect to the management
system.
5. (Optional) If you need to set other parameters, tap Settings.
12
Default Settings of
Device Replacement
By default, Device
replacement is set
to None. Restore the
SUN2000-(8KTL–
12KTL)-M2 protocol.
Model Selection for
Device Replacement
Select a model for device
replacement, set the grid
code, time zone, time, and
communication address,
and complete the protocol
replacement.