Hold Switch - Hitachi ZW 370-6 Operator's Manual

OPERATOR'S STATION

Hold Switch

Press hold switch (1) while letting the machine travel in the
auto shift mode, and the machine holds the speed gear range
that is currently displayed on the monitor.
Operate one of the following to release the hold function:
Press the hold switch again, Change the gear range, Change
the travel mode, or Press DSS (down shift switch).
f
NOTE: Lockup clutch does not function while holding the
speed range.
 Loading Control Lever
1
1
MNEC-01-044
MNEC-01-041
Fingertip Control Type
Multi-Function Joystick Type (Option)
 Joystick Steering Lever (Option)
1
(Upper one)
95Z7-1-85-1
1-113