2nd/3rd Speed Limit Switch (Option)
A three-position switch (1) is provided to enable the operator
to limit the maximum gear to 2nd or 3rd range while driving
in auto shift mode. This is used exclusively with the optional
joystick steering without the steering wheel/shift lever.
Hydraulic Coupler Switch (Option)
An optional hydraulic coupler switch (2) can be installed.
Refer to the operator's manual for the optional switch for
information.
Aftertreatment Device Regeneration Switch
Use this switch (3) to start the aftertreatment device manual
regeneration procedures when it is requested.
Refer to page 5-13 for details.
OPERATOR'S STATION
1-110
1
Fingertip Control Type
1
Limit to 2nd Speed
Limit to 3rd Speed
95Z7B-1-112-1
2
3
MNEC-01-041