Electrolux Explore 7 Compact E7CB1-8SSM Instruction Book page 7

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
USING THE TAKE AWAY BOTTLE*
11
Fill the ingredients in the take away bottle (I). Place the blender blade (E) on the open end of the jar and tight-
en the blender blade base (F) by screwing it on the jar. Turn the take away bottle upside down. Push down the
assembled take away bottle onto the blender base (A) and rotate it clockwise to lock until it clicks into position.
Note: When locked, the symbol
blender base.
Caution! The blades are very sharp!
12
The cooling stick keeps your smoothies cool for longer. Unscrew the cap of the cooling stick* (K) and fill it with
tap water. Screw the cap back on the cooling stick and place it in the freezer until the water freezes.
13
Place the frozen cooling stick in the blend bottle. Pour your freshly prepared blend into the Take away bottle
(I). Fasten the spill-proof drinking lid with carry handle (J). The cooling stick can be cleaned in a dishwasher.
USING THE MULTI-CHOPPER*
14
Fill the ingredients in the multi-chopper jar (L). Place the multi-chopper blade (M) on the open end of the jar and
tighten the multi-chopper blade base (N) by screwing it on the jar. Turn the multi-chopper jar upside down. Push
down the assembled multi-chopper onto the blender base (A) and rotate it clockwise to lock until it clicks into
position. Note: When locked, the symbol
on the blender base.
Caution! The blades are very sharp!
CLEANING AND CARE
15
Quick cleaning: Pour warm water into the jug, add a few drops of detergent.
Mix water and detergent by pressing the Pulse button then 2 a couple of times.
Finally, rinse the jug under running water.
Note: To avoid crazing of the jar, always rinse the jar with clean water directly after using in order to prevent the
plastic material being impacted by acids or essential oils. Always rinse the jar clean even before placing it into the
dishwashwer.
16
Thorough cleaning of the blender base and interface: Turn the blender off and unplug the power cord.
Wipe the blender base with a damp cloth.
Warning! Never immerse the housing, plug, or cord in water or any other fluid.
17
Thorough cleaning of the jug: Remove the lid and measuring cup. Rinse the blade assembly in water and deter-
gent. Caution! Handle carefully, the blades are very sharp!
All parts, except for the blender base are dishwasher safe.
Enjoy your new Electrolux product!
www.electrolux.com
(* CERTAIN MODELS ONLY)
on the blender blade assembly should be aligned with the symbol
(* CERTAIN MODELS ONLY)
on the multi-chopper blade base should be aligned with the symbol
GB
FR
AR
on the
BG
CZ
DE
DK
EE
ES
FA
FI
HR
HU
IT
LT
LV
NO
PL
RO
RU
SE
SI
SK
SR
TR
UA
7

Advertisement

Table of Contents
loading

Table of Contents