Advertisement
10 Factory Setting
10.1 How To Turn On The Factory Settings?
1. Set the power switch to ON, and turn to ON.
2. Keep pressing the "FOCUS ASSIST" button, "MENU" button and "Zoom Lever" to W side for more than 3 seconds until the top screen of
the Service Mode Menu being displayed.
3. Touch the [ 1 ] of LCD.
4. Touch the [ YES ] of LCD.
5. After few seconds "END" is displayed on LCD monitor. Cutting of battery connection or AC power supply connection as a completion of the
"FACTORY SETTINGS".
10.2 What Is The Factory Settings?
The factory settings clean up and/or refresh the following settings.
1. MENU, MODE, ADJUSTMENT VALUE.
2. Reset the folder number and fle number of still pictures.
(Setting the folder number is 100, and fle number is 0.)
3. Clear the time and date setting.
The shipment setting position of switches and lever:
(After the factory settings, set the switches and lever as following table.)
Name
Mode switch
iA/MANUAL/FOCUS
file:///C|/U...al/Temp/Rar$EXa0.580/viewing/SGML_VIEW_DATA/ALL/HC-MDH3PP/SVC/VM1803004CE/doc/VM1803004CE_10.xml[11/12/2018 4:19:13 PM]
Setting position
Recording mode
[ iA ] position
Advertisement
