Advertisement
2.3.2.3 How to Replace the Fuse
1. Remove the Fuse Cover with a screwdriver.
2. Replace the fuse and attach the Fuse cover.
2.4 How to Replace the Lithium Battery
2.4.1 Replacement Procedure
1. Remove the HANDLE P.C.B.. (Refer to Disassembly Procedures.)
2. Remove the Lithium battery (Ref. No. "B6701" at foil side of HANDLE P.C.B.) and then replace it into new one.
NOTE:
This Lithium battery is a critical component.
It must never be subjected to excessive heat or discharge.
It must therefore only be ftted in requirement designed specifcally for its use.
Replacement batteries must be of same type and manufacture.
They must be ftted in the same manner and location as the original battery, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposed of in waste products destined for burial rather than incineration.
file:///C|/U...al/Temp/Rar$EXa0.580/viewing/SGML_VIEW_DATA/ALL/HC-MDH3PP/SVC/VM1803004CE/doc/VM1803004CE_02.xml[11/12/2018 4:08:37 PM]
Advertisement
