Advertisement
Remote control overview
Trainer Port
SE
3 Position
SB
3 Position
SA
Button
S1
Slider Pot
Left Gimbal
SYS Button
RTN Button
PAGE> Button
PAGE< Button
TELE Button
TX12 has a built-in USB-C charging function for 3.7v to 4.2v lithium battery. The charging circuit is only
suitable for 2x 3.7v Li-ion 18650 or 2x 3.7v Lipoly batteries (2s 7.4v Lipo battery pack), the nominal battery
voltage is 3.7v, and the maximum charging voltage is 4.2v.
Do not use LiFE battery packs or 18650 lithium-ion batteries with a nominal voltage of 3.6v to 4.10v. Charging
the incorrect type of battery may damage the charger or cause a fire.
Please check the voltage and condition of the battery regularly and never charge it unattended. Always charge
in a safe area away from combustible materials. If the remote control gets wet or damaged in any way, do not
charge it.
RadioMaster does not assume any responsibility for any adverse consequences caused by the use or misuse
of this product.
Antenna
Handel
TYPE-C USB
SF
SC
SD
S2
Right Gimbal
Power Button
MDL Button
Trim Buttons
Menu Wheel
LCD Screen
3 Position
3 Position
Button
Slider Pot
2
Advertisement
