Fiat Panda 2015 Owner's Handbook Manual page 70

Table of Contents

Advertisement

Driving in special conditions
In certain driving conditions, such as,
for example:
❒ driving close to a bend (see fig. 52);
❒ vehicles with small dimensions
and/or not aligned in the driving lane
(see fig. 53);
❒ lane change by other vehicles (see
fig. 54);
system intervention can be unexpected
or delayed. The driver must therefore
be very careful, keeping control of
the vehicle to drive in complete safety.
52
IMPORTANT If you are driving on roads
close to trees with protruding branches
it is advisable to deactivate the system
to prevent the branches at the height
of the bonnet or the windscreen from
interfering with the system.
68
53
54
iTPMS (indirect Tyre
Pressure Monitoring
System)
(for versions/markets, where provided)
F1D0042
75) 76) 77) 78) 79) 80)
The vehicle can be equipped with the
iTPMS (indirect Tire Pressure
Monitoring System) which monitors the
tyre inflation status thanks to wheel
speed sensors.
The system warns the driver if one or
more tyres are flat by the dedicated
warning light continuously on and a
dedicated warning message on the
display.
If one tyre only is flat, the system can
indicate its position: it is in any case
recommended to check the pressure
on all four tyres.
This indication is displayed also when
F1D0043
turning the engine off and on again until
the RESET procedure is carried out.
Reset procedure
The iTPMS needs an initial "self-
learning" phase (with length depending
on the driving style and road conditions:
optimal conditions being driving on a
straight road at 80 km/h for at least 20
minutes) which starts when the Reset
F1D0044
procedure is carried out.
The Reset procedure must be carried
out:
❒ each time tyre pressure is modified;
❒ when even only one tyre is changed;
❒ when tyres are rotated/inverted;
❒ when the space-saver wheel is fitted.
Before carrying out the Reset
procedure, inflate the tyres to the rated
pressure values specified in the inflation
pressure table (see "Wheels" paragraph
in the "Technical specifications"
chapter).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents