Advertisement
Uni-P H20 200C DEHUMIDIFIER
Be sure to follow your GFCI maintenance instructions.you will typically need to test
of the trip circuit monthly.
For ease of testing and operation, it may be helpful to put the test switch and indicator lights in
a convenient location.
The design of the dehumidifier is suitable for indoors space that is protected from any forms
of flooding or rain.
It is important to install the dehumidifier in a room that has enough space.This is to allow you
to access the side and/or back panels easily for service and maintenance purposes.
Your dehumidifier should only be repaired by a qualified technician.
Do not insert objects or your fingers into the inlet or discharge.
Do not use water to clean the exterior of the dehumidifier. To clean unit, unplug from power, then
use a damp cloth to wipe the exterior.
Do not stand on dehumidifier or place objects on it.
Unless otherwise noted, all maintenance should be done with the unit power off.
4.Warranty Registration
Prior to installation of the unit,write down the serial number and date of purchase. You will need
this information if you need assistance in the future. The data label on the side of your unit has
the necessary information.
Model Number: Uni-P H20 200C
Serial Number:
For additional questions concerning your dehumidifier:
Contact your installing contractor
Contact US:
sales@unipdry.com
5.Parts Included
The Uni-P H2O 200CC Leveling Feet.
The Uni-P H2O 200CC Installation Instructions.
The Uni-P H2O 200CC Condensing Unit.
The Uni-P H2O 200CC Dehumidifier.
Tel: 888-990-7469
Installation, Operation & Service Instructions
the operation
Date of Purchase:
2
Uni-P H20 200C DEHUMIDIFIER
6.Specifcations
80°F/60% RH
@
DEHUMIDIFIER
Capacity@80℉/60%RH:
200 Pints Per Day
Airflow @ 0.0" SP
300 CFM
Operating Temp. Range
33-105°F
Operating Relative
36%-90%
Humidity Range:
2.8 L/kWh
COP:
Refrigerant:
R410A
7.6 Amps
Amperage Usage:
115V/60Hz
Power Supply:
/Single Phase
15 Amp,
Outlet Requirement:
3 Prong, GFCI
60 dBa
Sound Level:
:
Dimensions
:
. 25 "
Width
20
:
. 75 "
Height
21
:
"
Length
38
:
Weight
109 lbs
YES
ETL Listed:
3
Installation, Operation & Service Instructions
CONDENSER
.
9
7 Amps
Current Draw
Minimum Circuit
20 Amps
Ampacity:
Maximum Fuse
20 Amps
/ Breaker:
Refrigerant:
R410A
40°F Min,
Operating Range:
115°F Max
115V/60Hz
Power Supply:
/Single Phase
:
Dimensions
:
. 25 "
20
Width
:
. 75 "
Height
21
:
"
Length
38
:
109 lbs
Weight
Hard-Wired
Power Cord:
Tel: 888-990-7469
Advertisement
