Advertisement
L.P. Gas Cylinder Installation
A frosty cylinder valve indicates possible gas over fill.
Close the L.P. valve and call your dealer immediately.
1. Never store any extra cylinder under or near your grill.
2. Never fill your cylinder over 80% full by weight. This may cause release of
gas from the safety relief valve.
3. If the information in points 1 and 2 above is not followed exactly, a fire
causing death or serious injury may occur.
1. The gas supply must be turned off at the LP gas supply cylinder when this
gas grill is not in use.
2. Storage of this gas grill indoors is permissible only if the cylinder is
disconnected and removed from the gas grill.
3. Cylinders must be stored outdoors out of reach of children and must not be
stored in a building, garage or any other enclosed area.
L.P. GAS CYLINDER INSTALLATION
1. Lift the cylinder lock ring up and place the propane cylinder in the hole on the cart base. (See Fig. 25)
2. Secure the ring on the neck of the propane cylinder to lock the cylinder in position. (See Fig. 26 & 27)
3. Attach the LP hose and regulator to the propane cylinder. (See Fig. 26 & 27)
Cylinder Lock Ring
Fig. 25
WARNING
WARNING
WARNING
Fig. 26
Fig. 27
Advertisement
