Changing The Sound And Display Settings; Menu - Sony CDX-L550FP Operating Instructions Manual

Changing the sound and
display settings
The following items can be set:
SET (Set Up)
•CLOCK (page 9)
•BEEP — to turn the beeps on or off.
•RM (Rotary Commander) — to change the
operative direction of the controls of the
rotary commander.
— Select "NORM" to use the rotary
commander as the factory-set position.
— Select "REV" when you mount the rotary
commander on the right side of the
steering column.
DSPL (Display)
•D.INFO (Dual Information) — to display the
clock and the play mode at the same time
(ON).
•M.DSPL (Motion Display) — to select the
Motion Display mode from "1," "2," and
"OFF."
— Select "1" to show decoration lines in the
display and activate Demo display.
— Select "2" to show decoration lines in the
display and deactivate Demo display.
— Select "OFF" to deactivate the Motion
Display.
•A.SCRL (Auto Scroll)
— Select "ON" to scroll all automatically
displayed names exceeding 8 characters.
— When Auto scroll is set to off and the
disc/track name is changed, the disc/
track name does not scroll.
SND (Sound)
•LOUD (Loudness) — to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
P/M (Play Mode)
•LOCAL-ON/OFF (Local seek mode)
(page 11)
— Select "ON" to only tune into stations
with stronger signals.
•MONO-ON/OFF (Monaural mode) (page 11)
— Select "ON" to hear FM stereo broadcast
in monaural. Select "OFF" to return to
normal mode.
•IF AUTO/WIDE (page 11)
16

— Menu

1
Press (MENU).
To set A.SCRL, press (MENU) during CD
Playback.
2
Press either side of (PRESET) repeatedly
until the desired item appears.
3
Press the (+) side of (SEEK) to select the
desired setting (Example: ON or OFF).
4
Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the
source.
Tip
You can easily switch among categories ("SET,"
"DSPL," "SND," and "P/M") by pressing either side
of (PRESET) for 2 seconds.