LD LDLAX3USB User Manual page 10

connectionS, CONtROLS, AND INDICAtORS:
18
CD / tAPE IN tO MAIN
If this button is pressed, the signal present on CD / TAPE IN is sent directly to the main stereo
output. The signals from Channel 1 and 2/3 are not interrupted.
19 CD / tAPE IN tO PhONES / CONtROL ROOM
If this button is pressed, the signal present on CD / TAPE IN is sent directly to the stereo PHONES
/ CONTROL ROOM output. The signals from Channel 1 and 2/3 are muted. The volume of this
output is control via the volume control for PHONES / CONTROL ROOM (16) and, in this case, is
independent of the main mix control (14, MAIN MIX).
Note: The analogue/digital converter is parallel to MAIN OUT and TAPE/CD OUT in the signal path. This
means that the main stereo output signal of the mixer is sent to the recording software used.
10