NETGEAR Orbi Pro SRR60 User Manual page 117

Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 27.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VLAN / Bridge Settings.
The VLAN / Bridge Settings page displays.
5. Select the Enable VLAN/Bridge Group check box.
The page expands.
6. Select the By VLAN Profile radio button.
The section expands.
7. Click the Add button.
The Add VLAN Profile Rule page displays.
8. Specify the settings as described in the following table.
Field
ISP Profile
Name
VLAN ID
Priority
Select the check box for a wired Ethernet port.
If your device is connected to an Ethernet port on the router, select the Ethernet port check box that
corresponds to the Ethernet port on the router to which the device is connected.
You must select at least one Ethernet port. You can select more than one port.
9. Click the Apply button.
The VLAN profile is added.
10. Click the Apply button.
Your settings are saved.
Manage the LAN, WAN, and
WiFi Settings
Description
This menu is set to Others and you cannot change it.
Enter a name for the VLAN profile.
The name can be up to 16 characters.
Enter a value from 1 to 4094.
Enter a value from 0 to 7.
117 User Manual