Change The Transmission Output Power For A Radio; Enable Or Disable Daisy-Chain Topology - NETGEAR Orbi Pro SRR60 User Manual

Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60

Change the transmission output power for a radio

By default, the transmission output power of the router is set at the maximum. If two or
more WiFi routers, access points, WiFi gateways, or combination of these WiFi devices
are operating in the same area and on the same channel, interference can occur. In
such a situation, you might want to decrease the transmission output power for one or
both radios.
Make sure that you comply with the regulatory requirements for total radio frequency
(RF) output power in your country.
To change the transmission output power for a radio:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 27.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5. From the Transmit Power Control menu , select 100%, 50%, or 25%.
The default setting is 100%.
6. Click the Apply button.
Your settings are saved. The radio restarts and WiFi clients might need to reconnect.

Enable or disable daisy-chain topology

Daisy-chain topology allows your Orbi Pro satellite to connect to other Orbi Pro satellites.
This feature applies only if your network includes one Orbi Pro router and two or more
Orbi Pro satellites. If you disable this feature, your Orbi Pro satellites can connect to
your Orbi Pro router only. This feature is enabled by default.
WARNING: Enabling or disabling this feature causes all your Orbi Pro devices to reboot.
To reconnect your Orbi Pro satellites, use the Sync button.
Manage the LAN, WAN, and
WiFi Settings
107 User Manual