Change The Cts/Rts Threshold And Preamble Mode For A Radio - NETGEAR Orbi Pro SRR60 User Manual

Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60
Note: We recommend that you do not disable the WMM settings. If you disable the
WMM settings for a radio, the maximum link rate that your router can reach on the radio
is 54 Mbps.
To enable or disable WMM:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 27.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5. For a radio, select or clear the Enable WMM (Wi-Fi multimedia) settings check
box.
When this check box is selected (which it is by default), WMM is enabled.
6. Click the Apply button.
Your settings are saved.
Change the CTS/RTS threshold and preamble mode for a
radio
For most WiFi networks, the clear to send/request to send (CTS/RTS) threshold and
preamble mode work fine and we recommend that you do not change the settings. (In
general, these settings are intended for WiFi testing.)
CAUTION: Do not change these settings unless directed by NETGEAR support or
unless you are sure what the consequences are. Incorrect settings might disable the
WiFi function of a radio unexpectedly.
Manage the LAN, WAN, and
WiFi Settings
105 User Manual