Whittier Wood Furniture Shaker Cal-King Bed 1433AFVCL Assembly Instructions Manual

Advertisement

Quick Links

Shaker
Cal-King Bed
1433AFVCL
CANDLELITE FINISH
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start
by reading the Finishing Hints before you begin
your project.
For normal household use only.
recommended for commercial use.
Unload items from this unit prior to moving.
Before loading or moving this unit, check all screws
and supports for tightness.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged.
Please contact Whittier Wood Products
customer service department directly (by
phone, fax, mail or E-mail) for replacement
parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
800-653-3336
800-653-3336
Outside U.S. or Canada: 541- 687- 0213
Outside U.S. or Canada: 541- 687- 0213
Fax: 541-687-2060 • w ww
Fax: 541-687-2060 •
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
Read the Finishing Hints completely before beginning.
Store the item: 1) in the box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may be
affecting the stability of your furniture. Tighten or repair
as needed.
This Assembly requires two people.
Production Code:
VN
We will replace parts
w ww.whittie
.whittier r wood.com
wood.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Shaker Cal-King Bed 1433AFVCL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Whittier Wood Furniture Shaker Cal-King Bed 1433AFVCL

  • Page 1 Shaker Cal-King Bed 1433AFVCL Service Policy: We will replace parts which are defective, missing or damaged. CANDLELITE FINISH Please contact Whittier Wood Products customer service department directly (by Assembly Instructions phone, fax, mail or E-mail) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Page 2 1433AFVCL Shaker Cal-King Bed — Parts List If you should need to replace a part please refer to the following list for part number. 1436AFVCL (x1) B — Footboard — Qty.1 A — Headboard — Qty.1 R — Long Center Deckboard S —...
  • Page 3 1433AFVCL Shaker Cal-King Bed Assembly Instructions This Assembly Requires Two People TOOLS REQUIRED: Phillips screwdriver, 7/16" open end or box end wrench and tape measure. Shipping Straps Fig. 1 Remove the Long Center Deckboard (R), Short Center Deckboard (S) and the Trestles (C) that are underneath the Deckboards from the back of the Headboard as seen in Fig.
  • Page 4 Remove all Drawers from both Pedestals. The drawers have been pre-aligned from the factory. Take note of where each drawer came from to insure easy re-installation. The drawers are marked on the back end to assist in this process. Fig. 4b G x 8 H x 8 Place 4 Trestles (C) in between Pedestals and insert 1-½"...
  • Page 5 Repeat step 5 to assemble the Headboard (A) to the Pedestal Assembly as shown in Fig. 6. F x 6 H x 6 Fig.6 Tighten all bolts on Trestles securely. E x 24 Fig. 7 Place Deckboards (P) as shown in Fig. 7 and secure with #8 x 1¼" Screw (E). Page 5 —...
  • Page 6 9. Place Long Center Deckboard (R) and Short Center Deckboard (S) as shown in Fig. 9 and secure with #8 x 1¼"Screw (E). Place 3 additional #8 x 1" screws along seam between Deckboards (R) and (S). SEE FIGURE 9b. E x 12 Fig.

Table of Contents