Viessmann VITOPURE Manual Book page 30

PRODUCT INSTALATION
Installation of drain pipe
NOTES :
Insert the quick-plug drain joint into the drain outlet of the device.
Insert one end of the drain pipe into the quick-plug drain joint and the other end into the vertical drain pipe.
Properly discharge the waste water discharged during sedimentation and rinse through a drain pipe.
It is recommended to provide floor drain near the device,water outlet of washing machine and vertical drain
pipe.
Cut the drain pipe in proper length by the actual needs. It isavoided to be longer than 3m.
Drain pipe should be as less curved as possible.
All types of valves shall not be installed in drain pipe.
The drain pipe must be fastened, because water will flowout of the sewage outlet at a high velocity during
rinse. The drain pipe should be inserted into the vertical drain pipe, but must not be inserted to the end. The
drain pipe should be sealed with sealant in its surrounding area.
EN
Drain outlet
Masukan quick ke outlet
saluran pembuangan
Drain outlet
Insert the pipe to the
drain channel.
Vertical drain pipe
Floor drain
30