Fujinet And Ace-80(Xl) - Atari Ace 80 User Manual

Vintage Computer Center
www.VintageComputerCenter.com

FujiNet and ACE-80(XL)

To Boot ACE80 then to load an ATR from FujiNet.
FujiNet needs to be powered from an external power supply and the disk images needs to be
mounted to D1-D8 prior to inserting the ACE80 cartridge.
Boot the ATARI to FujiNet, then Select and Mount the software you want to boot into to D1-D8
driers, and Press [OPTION] then Switch off the ATARI computer, insert ACE80 cartridge and
Power on the Machine (make sure that power to FujiNet is not lost during this process) the
ATARI will boot into AC80 then will continue to boot your selected software
© 2021 Vintage Computer Center LLC
8