KORTING HK 9414 GMX User Manual page 8

INSTRUCTIONS FOR THE USER
USING
- Use only heavy based flat pans at least equal in
size or larger than the element being used (refer
fig.A).
- The containers should not have rough bottoms in
order to avoid scratching the heat surface of the
top.
- Do not turn the elements on without a pan in
place.
- Do not cook any food on the hot area.
- Avoid overflows of liquid.
- Turn off the plate few minutes before the cooking
end.
CLEANING
Remove leftovers and grease from the cooking
surface with the special scraper (fig.C) (optional).
After that clean the heating area as best as
possible whit a paper towel and SIDOL, STAHLFIX
o other similar products.
Never use abrasive sponges or irritating chemical
detergents such as over spray or spot removers.
CERAMIC PLATE
USE
Set the power rotating the knob, taking into
consideration that to the highest number
corresponds the maximum power (fig. B).
If the hob is fitted with extended zones, the outer
heating element can be switched on turning the
knob up to the end of rotation.
The indicator lamp will light when at least 1
element is in operation.
The indicator lamp will remain on when the
temperature of the hob is higher than 50°C.
A
8
B
C