Specifications - Makita 6704D Instruction Manual

ENGLISH (Original instructions)
1-1. Set plate
1-2. Battery cartridge
2-1. Switch trigger
3-1. Reversing switch
4-1. Red mark

SPECIFICATIONS

Capacities
No load speed (min
Fastening torque
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
4-2. Screw
4-3. Number
4-4. Adjusting ring
5-1. Hole for detent pin
6-1. Detent pin
Model
Machine screw
Bolt and nut
Square drive
-1
)
Overall lengh
Net weight
Rated voltage
) : 70 dB(A) or less
pA
2
) : 2.5 m/s or less
h
2
6704D
4 mm - 6 mm
9.5 mm or 6.35 mm
1.9 - 7.8 N•m
396 mm
1.5 Kg
ENE033-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG905-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG900-1
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Angle Socket Driver
Model No./ Type: 6704D,6706D
ENG901-1
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
3
6-2. Square drive
7-1. Bit with Form C 6.3 shank
7-2. Round drive
400
D.C. 9.6 V
Corporation as
6706D
4 mm - 6 mm
9.5 mm or 6.35 mm
400
1.9 - 7.8 N•m
396 mm
1.5 Kg
ENH101-15
the responsible