Specifications - Makita 6823 Instruction Manual

ENGLISH
1-1. Locking sleeve
2-1. Locator
3-1. Locator
4-1. Switch trigger
4-2. Lock button

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 80 dB (A).
Uncertainty is 3 dB(A).
Explanation of general view
5-1. Reversing switch lever
6-1. Hook
8-1. Locator
8-2. Locking sleeve
9-1. Locator
Model
Self drilling screw
Drywall screw
-1
)
Overall length
Net weight
Safety class
equipment and
environmentally compatible
6823
6 mm
6 mm
0 - 2,500
301 mm
1.5 kg
END201-2
The noise level under working may exceed 85 dB (A).
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to
EN60745.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 89/336/EEC, 98/37/EC.
its
000087
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
ENE033-1
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
ENF002-1
ADDITIONAL SAFETY RULES
FOR TOOL
1. Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
ENG003-2
parts of the tool "live" and shock the operator.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3
9-2. Bit
9-3. Magnetic bit holder
11-1. Lock button
13-1. Lock button
6824 6825
6 mm -
5 mm 4 mm
0 - 4,500 0 - 6,000
290 mm 290 mm
1.4 kg 1.4 kg
/II
Wear ear protection.
2
.
Yasuhiko Kanzaki CE2006
Director
6825R
-
4 mm
0 - 6,000
290 mm
1.4 kg
ENH101-6
ENB004-1