Advertisement
Quick Links
MULTIBAND
WIRELESS
IF400T
DETECTOR
ENGLISH
DESCRIPTION
is a multiband wireless infrared detector designed to realize a "curtain shape" protection
IF400T
barrier useful for doors and windows or everywhere is necessary to detect a movement that
happens in only one direction.
Features:
- Adjustable range from 2ft. up to 14ft. (from 1m up to 5m)
- Digital radio transmission (FSK) of high precision and stability
- Standard Lithium-Ions battery (CR2 type) of long lifetime
- 112 bit rolling code transmission for high security
- Transmission on 3 channels contemporary to avoid signal collisions and eventual signal saturation-
Supervised (automatic life-test)
- Double element PIR sensor
- Antiopening and Backtamper protection device (TAMPER).
- 4 functions (that can be enabled via the DIP-SWITCHES) useful to additionally reduce the device's
consumption and consequentially increase the battery's lifetime (POWER SAFE).
BOARD DESCRIPTION - CONNECTIONS
LEARN BUTTON = Used to let read the eventual DIP-SWITCH variations as well as Automatic Learning
signal (Device's Programming).
TAMPER SWITCH = Used as antiopening and backtamper protection as well as Walk Test Mode
reactivation command.
RANGE TRIMMER = By operating on it in anticlockwise direction the range will decrease up to 1mt
(min), instead by operating in clockwise direction the range will be increased up to 5mt (MAX).
www.amcelettronica.com
CURTAIN
SHAPE
INFRARED
INSTALLATION
HANDBOOK
VER. 1.0
IF400T - v 1.0
Advertisement
Related Manuals for AMC IF 400T
Summary of Contents for AMC IF 400T
- Page 1 MULTIBAND WIRELESS CURTAIN SHAPE INFRARED INSTALLATION HANDBOOK IF400T VER. 1.0 DETECTOR ENGLISH DESCRIPTION is a multiband wireless infrared detector designed to realize a “curtain shape” protection IF400T barrier useful for doors and windows or everywhere is necessary to detect a movement that happens in only one direction.
- Page 2 RANGE Trimmer DIP-SWITCH Configuration Battery Housing LEARN Button Fig. 1 DIP-SWITCH IMPORTANT: After the DIP-SWITCHES has been configured press at least 1 second the LEARN Button, after this operation the LED will blink fast. DIP1: Supervision OFF = 3 hours ON = 15 minutes DIP2: LED Disabling OFF = LED Enabled...
- Page 3 the detector active avoiding the return in the rest state. If, on the contrary, during this period it doesn’t detect any movement it will return to the rest state ready to send another signal. The return to the rest state is notified by a LED’s very fast blink, almost imperceptible to optimize the batterie’s consumption. The test mode is automatically activated during the first ignition, the duration is 20 cycles (the detector will not rest but it will restore 10/20 seconds after each violation for a total of 20 times.
- Page 4 AMC Elettronica S.r.l. refuses any responsibility when changes or unauthorized repairs are made to the product/system. It is recommended to test the operation of the alarm product/system at least once a month. Despite frequent testing and due to, but not limited to, any or all of the following: tampering, electrical or communication disruption or improper use, it is possible for the product/system to fail to prevent burglary, robbery, fire or otherwise.