Table of Contents
Advertisement
RAMFILL BALLAST OPERATION
The Ramfill ballast system valves will not open unless the boat is over 10 mph and
under 25 mph. The faster the boat speed (20-25 mph), the faster the fill and drain.
The Ramfill system is controlled by the Touch Vision Side-by-Side Dash display.
See the Touch Vision Operator's Manual for more information.
To fill the ballast tank:
1.
Navigate the boat to open water that is free of other traffic.
2.
Pull-up the Ramfill menu on the Touch Vision display.
3.
Select a pre-set or Manual fill option.
4.
Shift to Forward and accelerate to between 10 and 25 mph.
5.
When the ballast tank levels shown on the Touch Vision display reach the
desired level, turn Ramfill off.
6.
The boat is now ready for tow sports.
To fill the ballast tank:
1.
Navigate the boat to open water that is free of other traffic.
2.
Pull-up the Ramfill menu on the Touch Vision display.
3.
Select the Ramfill Drain option.
4.
Shift to Forward and accelerate to between 10 and 25 mph.
5.
When the ballast tank levels shown on the Touch Vision display show empty,
turn Ramfill off.
Controls, Features and Options
8-25
Advertisement
Table of Contents
