Steering System; Helm - Centurion Ri257 Owner's Manual

Section 8

STEERING SYSTEM

A mechanical-type rack and pinion steering system is used to transfer the helm
rotary movement to linear motion in the cable which pushes or pulls the rudder
arm and rudder to change the direction of the boat.
KC-0268-B
Figure 8-5

HELM

The following basic information may not apply to your specific boat. This section
may not cover all gauges on your boat. See the Engine Operator's Manual or
equipment manufacturer's supplied information on the use and operation of the
unique gauges and instruments. Some models may be equipped with a
multi-gauge instrument which integrates the functions of several single gauges.
Gauges are visual indicators that help you monitor various system and component
operation parameters. Gauges usually have lights integrated into them for visual
clarity when operating at night. They are located near the helm area or other main
control areas.
Shift and Throttle Control
Knowing how to operate the shift and throttle controls of your boat is essential for
safe and proper operation.
The following basic and typical information may not apply to your specific shift
control. See the Engine Operator's Manual or control manufacturer's instructions
for information on your throttle and shift control operation, adjustment and
maintenance.
Single-lever controls operate both the gear shift and the throttle for one engine
with one control lever.
8-6