7- REPLACEMENT OF THE MAIN COMPONENTS
REPLACEMENT OF THE MOTOR OF THE BITURBO BLOWER
Remove the cover of the evaporator unit fixed with 5 screws.
Remove the evaporator.
Remove the two turbines' covers taking away the 8 screws.
Remove the 4 screws of the blower mounting bracket and remove it.
Replace the motor making the corresponding electrical
connection.
Put back the motor's mounting bracket and adjust.
Important: Before tightening the bracket, center the motor correctly
so that the turbines do not on rub the sides.
Put back the two turbine covers.
Place back and adjust the cover of the evaporator unit.