Upholstery Cover - Viesa AGRO Installation Manual

2.5- UPHOLSTERY COVER

INSTALLATION PROCEDURE
1- Insert the weather strips into the evaporator`s base openings and
push the air ducts (burr up) through the weather strips
making pressure until they are firmly placed .
Important: Cut the air ducts if needed.
Air ducts 240 mm high can be ordered for very thick ceilings.
2- Attach the command and control module to the upholstery
cover inserting the 3 locking pegs into their holes. Insert the
ribbon cable as indicated in the figure (raise the connector head
first, introduce the ribbon cable and then push down the
connector head to lock).
3- Locate the switch commanding the water cycle and set it
according to the water column height.
(See Water Cycle Setting before)
4- Connect the electrical installation to the command
and control module.
CUT
LOCKED
UNLOCKED