Display; Display Functions Explained - ICON iSolar PDP Series Instruction Manual

8. Display

Before turning the controller on, ensure the pump is completely immersed, that
any isolators are switched on and flow control valves are open.

9. Display Functions Explained

No. Name
1
ON/OFF
2 SWITCH
(Display Scroll)
3
DIGITAL DISPLAY
4
SET
5
UP AND DOWN
ARROWS
6
ENTER (OK)
8
Function
Press ON/OFF button to turn the pump controller on and
commence operation.
Press again to turn the pump controller off.
To see if the pump is running press SWITCH to display RPM
Repeated presses scroll through real time operating values
Voltage / Pump Speed / Amperage / Wattage.
LEDs illuminate to show which value is displayed
Displays alpha numeric fault codes and operating values
Used to enter the programming mode
Used to increase or decrease program parameters
Used to accept a programming change
iCON iSOLAR 3"PDP Instruction Manual