Kit Contents And Technical Specifications - ICON iSolar PDP Series Instruction Manual

6. Kit Contents and Technical Specifications

Solar Panels and their mounting system (where applicable) are supplied
separately and come with their own instructions.
The Max Voc and Max Current (A) capabilities of the motor and the controller must always be
respected. Fitting additional or incorrectly rated panels will cause serious harm or irreparable
harm to the controller and motor voiding warranty.
B
C
D
F
Part
Model Motor kW/hp
No
PDP3 250 808691 0.25kW / 1/3hp
PDP3 370 808692 0.37kW / 1/2hp
PDP3 750 808694 0.75kW / 1hp
Solar array recommendation indicative only
Solar inputs must respect the Voc and Max Current (Amperage) values
iCON iSOLAR 3" PDP Instruction Manual
A
A. Isolator Switch
with M/F MC4 solar connecters.
B. PDP3 Solar Controller
C. Earth Strap
2.5m long, 4mm
D. Check/Non-return Valve
E
E. Low voltage, low water float
provide low water level protection.
G F. 30m nylon safety rope
G. iSOLAR PDP3 helical rotor pump and motor
30m 2.5mm
weather-proof 4 Pin (IP54 rated) plug. Outlet 1" BSPM.
Maximum Pump Submergence is 100m
Hmax Controller
60m
80m
140m
matched to suit the applicable pump model.
2
. Connects externally to the controller.
1" BSPF.
fitted with 30m cable to
2 power cable including earth and supplied with a
Solar Array
24V 1 x 300W
48V 2 x 300W in series
3 OR 4 x 300W in
96V
series
fitted with
Max Max
Vmp
VOC Amps
18 – 40V
48V 15A
40 – 76V
96V 15A
80 – 150V
180V 15A
5