Maintenance - Iarp Delight Lite Series Use And Maintenance

8. MAINTENANCE

WARNING!
ANY WORK CARRIED OUT ON THE APPLIANCE BY THE USER STRICTLY REQUIRES
THE POWER PLUG BEING DISCONNECTED FROM THE MAINS SOCKET.
The equipment manager is obliged to check and comply with the maintenance deadlines in the table
indicated below.
OPERATION
Cleaning the outer surface
Cleaning the accessible inner parts
Checking the power supply, electrical plugs and/or sockets.
Checking the gasket
Reserve tank cleaning
Checking the drainer discharge tube
Inspecting the cables and inner power connections
Replacing the led lights
Replacing the power supply cable
The other maintenance operation must be carried by AUTHORISED STAFF.
9. CLEANING
9.1 OUTER CLEANING
For a good preservation of the cabinet's body a periodical cleaning is necessary.
EXTERNAL BODY: When necessary, the external body should be cleaned with a cloth and a neutral soap
1
and water solution.
STAINLESS STEEL SURFACES: Wash with warm water and mild detergent, rinse well and dry with soft cloth.
2
Avoid scouring pads etc. which will spoil the finish of the stainless steel.
SURFACES IN PLASTIC MATERIAL: Wash with warm water and mild detergent, rinse well and dry with soft
3
cloth; under no circumstances should alcohol, methylated spirits or solvents be used.
GLASS SURFACES: Only use products specifically designed for glass cleaning; It is not advisable to use
4
ordinary water which can leave a film of calcium on the surface of the glass.
4
(do not use tools)
3
4
2
1
1
ORDINARY /
FREQUENCY
EXTRAORDINARY
MAINTENANCE
Based on use Ordinary
Based on use Ordinary
Six-monthly Ordinary
Six-monthly Ordinary
Based on use Ordinary
Based on use Ordinary
Six-monthly Ordinary
- Extraordinary
- Extraordinary
4
1
AUTHORISED
STAFF
User
User
User
User
User
Technical support
Technical support
Technical support
Technical support
4
4
1
-16-