Example: Operating A Cd Player - Sony RM-TP501E Operating Instructions Manual

Example: Operating a CD Player

This section describes how to operate a CD player
connected to the amplifier. Other components can also be
operated in the same way.
For details concerning CD player operation, please refer
to your CD player's operating instructions.
The screens used in the following example are the screens
that appear when using a SONY CD changer with a
CONTROL A1 terminal.
1
Touch FUNCTION.
The FUNCTION screen appears.
2
Touch .
The amplifier's function switches to CD and the CD
screen appears.
Selected maker and
category (see page 20).
• Long titles can be read by touching the scroll icon ( ) to
scroll along the title.
* Only displayed when a Sony CD changer (5/50/200 CDs) is
connected to the amplifier by a CONTROL A1 cord.
3
Touch ( to start playback.
z
When the song number or song title is not displayed
correctly
Point the commander toward the amplifier and touch RELOAD.
Disc title*
Song title*
To operate other functions
Touch SUB. Another set of buttons are displayed and
ready for use.
To view the list
Touch LIST to view the disc titles in a Sony CD changer (5,
50, 200 CD) or the song/disc titles in a Sony MD deck
connected by a CONTROL A1 cord. In this case of a Sony
CD changer, the information must be downloaded from
the receiver (see page 21 for details).
The LIST screen can only be displayed when the
FUNCTION is set to CD or DAT/MD.
• Touch the disc number to start playing that disc.
the disc being played.
• Use the JOG DIAL or touch 4 or $ to scroll up or down the list.
• Touch NUMBER to sort in numerical order or touch TITLE to
sort in alphabetical order.
• Touch FUNCTION to return to the FUNCTION screen at any
time.
appears on
13 GB