Advertisement
10
All operation of the video tape
recorder, apart from loading and
unloading of a tape, is done via the
Beo4 remote control.
You can play, pause and stop a
loaded tape, rewind and fast
forward, or cue the tape backwards
and forwards at two speeds. You can
also choose to play a tape in slow
motion.
Load and play a videotape
Load a videotape
Loading and unloading of videotapes is done
manually via the loader on the front and the
close-up operation panel on the back of
BeoVision Avant.
BANG &OLUFSEN
> Push the tape under the loader cover into the
compartment in the centre below the screen.
> Let go of the tape when you feel the
mechanism drawing the tape into the
compartment.
> Press the EJECT button on the operation panel
behind the BeoVision Avant display bar to
unload a tape.
Never leave a tape in the compartment opening!
The open flap keeps the system alert and thus
wastes energy. The flashing standby indicator will
prompt you to load or unload the tape.
Advertisement
