Features - Sony RVP-411DS Operating Instructions Manual

Features

About the Models RVP-411DS/411DMS and CHP-411D/411DM
RVP-411DS/411DMS
The RVP-411DS/411DMS is a projection wall unit to
compose a projection wall system. Use the unit with
the optional VPS-411RF (1.7 mm seam) or VPS-
415RF rear screen (0.2 mm seam). The expected
performance cannot be obtained if the unit is used with
other screens.
Main Features
Point-scan input capability
The analog RGB signals (31.25 kHz/50 Hz, 31.25
kHz/100 Hz, 31.5 kHz/60 Hz, 31.5 kHz/120 Hz) can
be input to the RGB IN connectors. When an optional
video input board is used, the analog RGB signals
(15.625 kHz/50Hz, 15.75 kHz/60 Hz) can be input.
Flicker-free
When an optional video input board is used, a high-
quality picture without flicker can be obtained, since
the analog 15K RGB, analog color difference and
composite video signals with 50 Hz and 60 Hz vertical
frequency are processed to field-doubled signals when
input to the projector.
Narrow screen frame
If you use the optional VPS-411RF (1.7 mm seam) or
VPS-415RF (0.2 mm seam) rear screen, obstruction of
the display can be minimized when the projectors are
stacked.
CHP-411D/411DM
The CHP-411D/411DM is a product equivalent to the
chassis of the RVP-411DS/411DMS and RVP-511DS/
511DMS. The unit is designed for use with either a
41-inch or 50-inch screen.
When it is used with a 50-inch screen, however,
certain readjustments such as registration adjustment
are required. For a 50-inch screen, use either the
optional VPS-511RF (1.7 mm seam) or VPS-515RF
(0.2 mm seam) rear screen only.
Light weight and short depth
The projector can be handled easily thanks to its light
weight and placed in compact spaces because of its
short depth.
REMOTE connector to connect the RS-422
interface for interactive communication
The various controls can be operated with the
connected computer. Linked connection of the several
projectors can also be made by connecting them to
REMOTE IN and OUT connectors.
5 (E)