Table of Contents
Advertisement
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal
safety, as well as to prevent damage to property. The notices referring to your
personal safety are highlighted in the manual by a safety alert symbol, notices
referring only to property damage have no safety alert symbol. These notices
shown below are graded according to the degree of danger.
indicates that death or severe personal injury will result if proper
precautions are not taken.
DANGER
indicates that death or severe personal injury may result if proper
precautions are not taken.
WARNING
indicates that minor personal injury can result if proper precautions are not
taken.
CAUTION
indicates that property damage can result if proper precautions are not
NOTICE
taken.
If more than one degree of danger is present, the warning notice representing the
highest degree of danger will be used. A notice warning of injury to persons with a
safety alert symbol may also include a warning relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified for the specific task in accordance with the relevant
documentation, in particular its warning notices and safety instructions. Qualified
personnel are those who, based on their training and experience, are capable of
identifying risks and avoiding potential hazards when working with these
products/systems.
Proper use of Siemens products
Note the following:
Siemens products may only be used for the applications described in the
catalog and in the relevant technical documentation. If products and
components from other manufacturers are used, these must be
recommended or approved by Siemens. Proper transport, storage,
WARNING
installation, assembly, commissioning, operation and maintenance are
required to ensure that the products operate safely and without any
problems. The permissible ambient conditions must be complied with. The
information in the relevant documentation must be observed.
Siemens AG
A5E46263338-AB
Ⓟ 04/2021 Subject to change
Division Digital Factory
Postfach 48 48
90026 NÜRNBERG
Copyright © Siemens AG 2021.
Germany
All rights reserved
2
Advertisement
Table of Contents
