Legal Information - Siemens SIPIX SD100 Operating Manual

Legal Information

Warning notice system
This manual contains information that must be observed to ensure your personal
safety and to prevent property damage. Notices referring to your personal safety
are highlighted in the manual by a safety alert symbol; notices referring to property
damage only have no safety alert symbol. The notices shown below are graded
according to the degree of danger.
indicates that death or severe personal injury will result if proper precautions are
not taken.
DANGER
indicates that death or severe personal injury may result if proper precautions are
not taken.
WARNING
indicates that minor personal injury may result if proper precautions are not taken.
CAUTION
CAUTION indicates that damage to property may result if proper precautions are not taken.
If multiple levels of hazards can occur, the warning is always displayed with the
highest possible level. A notice warning of injury to persons with a safety alert
symbol may also include a warning relating to property damage.
Qualified personnel
The product/system described in this documentation may be operated only by
personnel qualified for the specific task in accordance with the relevant
documentation, in particular its warning notices and safety instructions. Qualified
personnel are those who, based on their training and experience, are capable of
identifying risks and avoiding potential hazards when working with these
products/systems.
Proper use of Siemens products
Note the following:
Siemens products may only be used for the applications described in the catalog and in
the relevant technical documentation. If products and components from other
manufacturers are used, they must be recommended or approved by Siemens. Proper
transport, storage, installation, assembly, commissioning, operation, and maintenance
CAUTION
are required to ensure that the products operate safely and without any problems. The
permissible ambient conditions must be adhered to. The information in the relevant
documentation must be observed.
Siemens AG
Ⓟ 12/2017 Subject to change
Industry Sector
P.O. Box 48 48
90026 NUREMBERG
Copyright © Siemens AG 2017.
GERMANY
All rights reserved
2