Intertek F18B411 Manual page 7

STEP 1
1-1. Position the 3 post brackets on the base as shown in the picture.
1-2. Use 3 bolts (M8 x 15 mm) to assemble the post, brackets and stand.
STEP 2
2-1. Put the post on the top of 3 post brackets.
2-2. Use 6 M6 bolts (FF) and nuts (GG) to connect the post to the 3
post brackets. Tighten the bolts and nuts.
STEP 3
3-1. Place the tank housing (E) on the base (G).
7
G
GG
G
7