Summary of Contents for Intertek F18B411
- Page 1 Gas Stand-Up Heater SKU:F18B411 & F18G412 & F18S413 5016039 Byphone:+1-626-4201-198 IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.
-
Page 2: Carbon Monoxide Hazard
SKU:F18B411 & F18G412 & F18S413 DANGER WARNING If you smell gas: Do not store or use gasoline or other flammable vapours and liquids 1. Shut off gas to the appliance. in the vicinity of this or any other appliance. An LP-cylinder not 2. - Page 3 DANGER DANGER CARBON MONOXIDE HAZARD EXPLOSION - FIRE HAZARD This heater is a combustion appliance. All Keep solid combustibles, such as building materials, combustion appliances produce carbon monoxide paper or cardboard, a safe distance away from the (CO) during the combustion process. This product is heater as recommended by the instructions.
-
Page 4: Burn Hazard
SKU:F18B411 & F18G412 & F18S413 WARNING WARNING This product is fuelled by propane gas. Propane gas California Proposition 65 is invisible, odourless and flammable. An odourant is Combustion by-products produced when using this product normally added to help detect leaks and can be contain chemicals known to the State of California to cause described as a “rotten egg”... - Page 5 and 12 pcs packed in Zip lock bag, together with wheels H040040005 M6 Cap Nut H010110049 M6*8 Bolt H020040001 Reflector Stud P003100061 H040030005 Reflector Wing Nut H010010019 P000900060 Flame screen M6*12 Bolt H010010020 Burner P007900027 M6*30 Bolt P000200308 H040010003 Post M6 Nut P006900019 Tank housing...
- Page 6 SKU:F18B411 & F18G412 & F18S413 Secure the cylinder fixer (MM) with two M6 bolts (EE) and nuts (GG). Fix another two cylinder fixers (MM) with bolts and nuts, and reverse the base (G). Secure the ground fixer (HH) with two M6 bolts (EE) and nuts (GG).
- Page 7 STEP 1 1-1. Position the 3 post brackets on the base as shown in the picture. 1-2. Use 3 bolts (M8 x 15 mm) to assemble the post, brackets and stand. STEP 2 2-1. Put the post on the top of 3 post brackets. 2-2.
- Page 8 SKU:F18B411 & F18G412 & F18S413 STEP 4 4-1. Attach a reflector stud (CC) and three washers Ø8 (JJ) to the top of the burrer (C). Tighten the reflector stud. 4-2. Unscrew the four screws that are preassembled on the head assembly (C).
- Page 9 11. Screw gas hose (C) and regulator (E) onto propane 8 cylinder (not included). Do not cross-thread. Every part of the heater should be secure against displacement and should be constructed to maintain a fixed relationship between essential parts under normal and reasonable conditions of handling and usage.
- Page 10 SKU:F18B411 & F18G412 & F18S413 A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your cylinder supplier. Never use a propane cylinder with a damaged valve connection. The propane cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S.
- Page 11 To check for a leak: 1. Make 2-3 oz. leak check solution (one part liquid WARNING dishwashing detergent and three parts water). Perform all leak tests outdoors. Extinguish all open flames. 2. Apply several drops of solution where regulator NEVER leak test when smoking. connects to cylinder and to all hose and valve Do not use the heater until all connections have been connections.
-
Page 12: Before Lighting
SKU:F18B411 & F18G412 & F18S413 CEILING DANGER 120 cm CARBON MONOXIDE HAZARD For outdoor use only. Never use inside house, or other unventilated or enclosed areas. This heater consumes air (oxygen). Do not use in unventilated or enclosed areas to avoid endangering your life. - Page 13 Lighting: 1. Turn on the valve on the gas cylinder. 2. Press and turn the control knob to PILOT position (anti-clockwise 90º). (Figure 1) 3. Holding down the control knob, press the igniter button several times until the main flame is ignited. Release the control knob 10 seconds after the ignition.
-
Page 14: For Your Safety
SKU:F18B411 & F18G412 & F18S413 WARNING FOR YOUR SAFETY Be careful when attempting to manually ignite this heater. Holding in the control knob for more than 10 seconds before igniting the gas will cause a ball of flame upon ignition. -
Page 15: After Operation
9. Heater is away from gasoline or other flammable liquids or vapours. 10. Heater is away from windows, air intake openings, sprinklers and other water sources. 11. Heater is at least 2.3 feet on top and at least 3.3 feet on sides from combustible materials. 12. -
Page 16: During Periods Of Extended Inactivity Or When Transporting
SKU:F18B411 & F18G412 & F18S413 Visually check portions of the hose assembly located within the confines of the heater post. Inspect the entire hose assembly at least annually, disassembling the reflector and burner. Inspect the hose assembly for evidence of excessive abrasion, cuts, or wear. Suspected areas should be leak tested. Then assembling the reflector and burner again following with step 6 and 7. - Page 17 PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Wait until the propane cylinder Propane cylinder is frosted over warms up and is defrosted Burner won’t light Blockage in orifice Clear blockage Control knob is not in ON position Turn control knob to ON Turn cylinder valve OFF and replace Gas pressure is low cylinder...
- Page 18 SKU:F18B411 & F18G412 & F18S413 This product is inspected, tested and carefully packaged to minimize the chance of damage during shipment. If a part within one year from the date of purchase proves to be defective in material or fabrication under normal use, the part will be repaired or replaced. The Company's obligation under the warranty is to replace or repair defective parts at our discretion.