Admonishments; Description - TE Connectivity FPX Series Installation Instructions Manual

Fiber panel
Table of Contents

Advertisement

Admonishments

Important safety admonishments are used throughout this manual to warn of possible hazards to
persons or equipment. An admonishment identifies a possible hazard and then explains what
may happen if the hazard is not avoided. These warnings are flagged by use of the triangular
alert icon (seen below) and are listed in descending order of severity of injury or damage and
likelihood of occurrence.
Danger: Danger is used to indicate the presence of a hazard that will cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Warning: Warning is used to indicate the presence of a hazard that can cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Caution: Caution is used to indicate the presence of a hazard that will or can cause minor
personal injury or property damage if the hazard is not avoided.

1 DESCRIPTION

Note: The Fiber Panel Next Generation is designed to be installed in an environmentally
controlled network telecommunications facility such as a Central Office, Controlled
Environmental Vault, or Data Center.
The FPX 1RU and 2RU panels can accommodate up to 48 and 96 terminations, respectively.
Typically, the panel ships empty. The panel may also be ordered with adapter packs, Multifiber
Push-On (MPO) cassettes, splice trays, or pigtails. The panel can be configured for termination
only (without splice trays) or for termination/splice.
Caution: Adapter packs and MPO cassettes should not be both used in the same panel.
Figure 1. FPX 2RU Panel (Front View)
ADCP-92-159 • Issue 1 • 2/2015
Figure 1
shows the 2RU panel.
25677-A
© 2015, Tyco Electronics Corporation
Page 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fpx 1ruFpx 2ru

Table of Contents