Table of Contents
Advertisement
4 OPERATION
4.1
Sliding the Drawer In and Out
The panel has a tray release button and tray retainer clips designed to ensure that the drawer is
opened carefully and remains open until work in the drawer is competed. These items look the
same and operate the same on the 1RU and 2RU panels. Use the following procedure to slide
the drawer in and out (2RU shown):
1. To release a closed drawer, press the release button down, as shown in
the drawer out to the retainer clip (one on each side).
Figure 32. Example of Completed Splice
ADCP-92-159 • Issue 1 • 2/2015
Figure
33, and slide
Page 25
© 2015, Tyco Electronics Corporation
Advertisement
Table of Contents
